How To Set Up A TOR Middlebox Routing All VirtualBox Virtual Machine Traffic Over The TOR Network

This tutorial will show you how to reroute all traffic for a virtual machine through the Tor network to ensure anonymity. It assumes a standalone machine with a Linux OS, and VirtualBox installed. In this case, we'll be using Ubuntu on the host machine.
Thanks to
- http://www.tolaris.com/2009/03/05/using-host-networking-and-nat-with-virtualbox/
- https://trac.torproject.org/projects/tor/wiki/doc/TransparentProxy
- http://www.rootdamnit.eu/2011/12/10/virtualbox-tor-backtrack-aka-how-to-become-almost-invisible/
All commands on the host machine should be run as root (sudo or su.

Step 1 - Add A Bridge Interface For Your Virtual Machine (VM) On The Host Machine (HM)

Add the following to /etc/network/interfaces:

# VirtualBox NAT bridge
auto vnet0
iface vnet0 inet static
 address 172.16.0.1
 netmask 255.255.255.0
 bridge_ports none
 bridge_maxwait 0
 bridge_fd 1
        
 up iptables -t nat -I POSTROUTING -s 172.16.0.0/24 -j MASQUERADE
 down iptables -t nat -D POSTROUTING -s 172.16.0.0/24 -j MASQUERADE

Start the bridge interface:

Step 2 - Setup DHCP And DNS For Clients

Edit /etc/dnsmasq.conf to include:

interface=vnet0
dhcp-range=172.16.0.2,172.16.0.254,1h

Start the daemon:

Step 3 - Install And Set Up TOR

Install TOR - INSTUCTIONS
Edit /etc/tor/torrc and add:

VirtualAddrNetwork 10.192.0.0/10
AutomapHostsOnResolve 1
TransPort 9040
TransListenAddress 172.16.0.1
DNSPort 53
DNSListenAddress 172.16.0.1

Restart TOR:
Create and edit middlebox.sh on the HM:

#!/bin/sh

# destinations you don't want routed through Tor
NON_TOR="192.168.1.0/24"

# Tor's TransPort
TRANS_PORT="9040"

# your internal interface
INT_IF="vnet0"

iptables -F
iptables -t nat -F

for NET in $NON_TOR; do
 iptables -t nat -A PREROUTING -i $INT_IF -d $NET -j RETURN
done
iptables -t nat -A PREROUTING -i $INT_IF -p udp --dport 53 -j REDIRECT --to-ports 53
iptables -t nat -A PREROUTING -i $INT_IF -p tcp --syn -j REDIRECT --to-ports $TRANS_PORT

and run it:

Step 4 - Set Up The Virtual Machine On The HM

Open VirtualBox, start the machine. Go to Devices > Network Adapter. Disable all network adapters except Adapter 1.
Set the following options:
Attached to: Bridged Adapter
Name: vnet0
Click OK.
Finally make sure your virtual machine gets its IP address via DHCP, and refresh the DHCP client/reboot the VM. It should have an IP in the range 172.16.0.n, name resolver 172.16.0.1 and gateway 172.16.0.1.

TERIMA KASIH ATAS KUNJUNGAN SAUDARA
Semoga artikel ini bermanfaat bagi saudara. Jika ingin mengutip, baik itu sebagian atau keseluruhan dari isi artikel ini harap menyertakan link dofollow ke https://androidblackberries.blogspot.com/2012/02/how-to-set-up-tor-middlebox-routing-all.html. Terima kasih sudah singgah membaca artikel ini.